AAT ICAS 2076 ✧ metrication resources module

AAT ICAS metrication resources

this document describes additional metrication resources that may be useful for reference by ICAS developers and users. some other information on the web is listed below. the following information sources are maintained by others. they are not part of the aatideas.org web site.

Bureau International des Poids et Mesures (BIPM)

International Electrotechnical Commission (IEC)

IEEE-SA Standards Board Implementation Plan for Policy 9.19

International Organization for Standardization (ISO)

Lawrence Berkeley Laboratory (lbl.gov) metrication policy

Localisation Industry Standards (ETSI - LIS) (as of d8B02 Violet) [with gratitude to LISA]

metricationmatters.com by Pat Naughtin ASM (NSAA), LCAMS (USMA)*

• Pat Naughtin is the editor of the free online monthly newsletter, Metrication matters. to subscribe go to http://www.metricationmatters.com/newsletter for information. * Pat is an Accredited Speaking Member (ASM) with the National Speakers Association of Australia, and a Lifetime Certified Advanced Metrication Specialist (LCAMS) with the United States Metric Association.

Metrologia

The revision of the SI—the result of three decades of progress in metrology. Michael Stock, Richard Davis, Estefanía de Mirandés and Martin J T Milton. Metrologia 56.2 published 2019 February 22. copyright © 2019 BIPM & IOP Publishing Ltd

National Institute of Standards and Technology publications

A Walk Through Time: The Evolution of Time Measurement through the Ages, A NIST Physics Laboratory Presentation

statement from the National Institute of Standards, an agency of the United States Department of Commerce

National Science Teachers Association (NSTA) position statement

directive from the United States Treasury Department

directive from the United States Department of Agriculture

website of the UK Metric Association

website of the US Metric Association (with information about USMA discussion list)

bibliography selections

"Start metricating your company now!" by Jim Elwell, Machine Design, issue 2004 Nov 04, www.machinedesign.com

NIST Special Publication 330, 2001 Edition, The International System of Units (SI), Barry N. Taylor, Editor, National Institute of Standards and Technology, United States Department of Commerce.

NIST Technical Note 1297, 1994 Edition, Guidelines for Evaluating and Expressing the Uncertainty of NIST Measurement Results, Barry N. Taylor and Chris E. Kuyatt, National Institute of Standards and Technology, United States Department of Commerce.

United States Federal Register vol 63 no 144, 1998 Jul 28 tues, Notices, pp 40334-40340.

article "Writing Money" posted by Pat Naughtin in USMA:25720

extract from "Metrication in Australia" by Kevin Wilks posted by Pat Naughtin in USMA: 26116.

extract from "Final Annual Report (1980-81) of the Metric Conversion Board" in Australia posted by Pat Naughtin in USMA: 27852.

top

aatideas.org document updated: